1/4" 6mm Enema Tube Ramp Clamp
Click To Enlarge

RMPCLMP Yellow 1/4" Ramp Style Flow Control Tubing Clamp

Price: $6.75
  • Item #: RMPCLMP-Yellow
  • Condition: New
* Marked fields are required.
Availability: In-Stock
# Available: 3
Qty: *

This is our small high quality heavy duty ramp style flow control valve that will accommodate from 3/16" to 1/4" outside diameter thin wall rubber, silicone or vinyl tubing. It works perfectly on any of our 1/4" silicone tubing selections and also works equally well on the vinyl tubing found on most clear vinyl enema bags kits. Valve will accurately control fluid flow in flexible tubing from zero to full flow with the use of the grooved thumb control wheel for adjustment.  No fittings or cutting required. Simply slide your tubing into the opening between the wheel and the body of the clamp, or remove the roller wheel out the end of the clamp and lay your tubing into the clamp channel. Replace the roller wheel into the end of the clamp and roll into position. Small gear teeth on each end of the center axle shaft of the roller wheel ingage the matching teeth in the slotted channels on each side of the body for precision actuation without slippage. All our ramp clamps and ball style flow control valves are made in the U.S. for quality and durability. Makes control of fluid flow much more accurate than slide or click style pinch clamps.

All of our roller flow control pieces are color coded for easy size selection.

Yellow - Small

Blue - Medium

Red - Large

Reviews (0) Write a Review
No Reviews. Write a Review