Balloon retention style nozzle inflator & valve
Click To Enlarge

Micro Small Red 3/16" Roller Style Thick Wall Tubing Flow Clamp

Price: $9.75
  • Item #: RMPCLMP-Red Micro
  • Condition: New
* Marked fields are required.
Availability: In-Stock
# Available: 18
Qty: *

This is our micro small high quality heavy duty, made in the U.S. ramp style flow control valve that will accommodate from 1/8" to 3/16" outside diameter thin wall rubber, silicone or vinyl tubing. It works perfectly on our 3/16" clear vinyl airway tubing that is used on our single balloon inflatable nozzle series. Roll valve will accurately control fluid flow in flexible tubing from zero to full flow with the use of the grooved thumb control wheel for adjustment.  Small gear teeth on each end of the center axle shaft of the roller wheel ingage the matching teeth in the slotted channels on each side of the body for precision actuation without slippage. All our ramp clamps and ball style flow control valves are made by a U.S. manufacturer.

This clamp is specifically for very small thin wall type tubing we now offer as well. The best way to apply the clamp to the tubing is to pop the roller wheel out of the end of the channel and then lay the tubing into the channel at the position you desire. Then press the roller back into the end of the channel until you hear it snap into place and it will then roll up and down the channel and apply pressure and close or open the tube.

All of our roller flow control pieces are color coded for easy size selection.

Red - Micro 3/16"

Yellow - Small 1/4"

Blue - Medium 3/8"

Red - Large 9/16"

 

Reviews (0) Write a Review
No Reviews. Write a Review