|
|
|
|
|
This piece has a 7”(180mm) total length with an approximate 160mm insertable length. The tip is 10mm in diameter tapering up to 12.5mm, then it reaches a ball that is about 21mm long, that ball has been flattened on two ends, and if the two surfaces are measured, the flats measure 13mm, but the ball is 17.5mm in diameter on the rounded part. Then the retention valley begins, the valley is about 10.2mm in diameter, then it climbs up to 15.1mm, before shrinking to a 14.2mm valley, which then climbs to the safety flange, which is approximately 21mm diameter and not intended for insertion.
The silicone material is available in multiple levels of softness as shown in the drop list selections. This sound should be extremely comfortable yet still rather stimulating for extended wear if that is what you desire. The #00-50 softness is nice when you want a sound that is compressible and will continuously stretch the urethra outward while inserted. Bear in mind this very soft, pliable silicone takes a little more lubrication and slightly more effort to get introduced but is well worth the experience and sensations.
As with all our other silicone nozzles, this one is also available in a wide array of material softness and colors. Please make note that the "00-50 Plus Soft" and the "10 Soft" silicones are not available in the pure translucent color. They are available in all the other colors including the translucent white material in the drop list. If you accidentally order one of those softness selections with the normal translucent color option, we will automatically substitute the translucent white color instead.
You can make your individual selections as to color, level of softness, and open or solid core type from the drop list boxes.
Please let us know what you think!
