Here is another adaptation of a retention style nozzle with multiple ribs and sensory valleys in a 17" length and 1.4" largest overall diameter at the ribbed tip. It is available with a 1/4" or 5/16" internal bore.
Overall length of this nozzle is 17'' including the flanged base, insertible length is approximately 15". The diameter at the tip is 1.3" and the first enlarged rib is 1.4"followed by an alternating pattern of large, small ribs. The rib size variations are minimal(.02"). There are valleys that seperate each rib(1.14").The nozzle has several additional ribs and sensory valleys up through the remaining shaft ahead of the retension flange at the end. The deep V design of the flange allows it to gently nestle into the crevice between the cheeks and retain a comfortable position during administration and retention of your enema session.
This is a really nice nozzle for articulating its way up through the rectum and into the lower sigmoid colon allowing for the deposition of the enema fluid to gently and easily flow into the transverse and higher colon for a complete filling experience.
This piece is not meant to function as a full retention style nozzle but will enhance your ability to retain the enema solution after it has been administered. Overall, it is a very pleasurable sensory enhancing nozzle as well.
You can make your individual selections as to color, level of softness and bore size or no bore (solid style) from the drop list boxes.
Our Connector Pack option includes three varying connector sizes that will allow you to connect this product to any existing equipment or tubing you may already own. Please select yes or no for the additional three pack of connectors for a nominal charge.