CT-63French Silicone Serpentine Colon Tube 18"
- In stock, ready to ship
- Inventory on the way
Here is our smallest diameter colon tube. At 63 on the French Scale, it is approximately .825" in diameter. It is made from the same high-quality and durable Platinum Silicone material as all our nozzles and colon tubes. You can see in the photos how flexible this nozzle really is.
This tube has two uniquely styled tips that will be classified as A and B, as seen in the photos.
Tip A is the ribbed ball style. The beginning of the tip has a unique taper into a rib style, and then the following balls are approximately .825" in diameter.
Tip B is the smooth tapered style tip. It begins with a gently rounded tip that gradually expands in diameter up to the .825" diameter shaft size.
The new Ball Style Retention Flange is now the only flange available for this colon tube, as seen in the new photos as well. The retention ball diameter is approximately 1.3'', then shrinks down to a 0.850'' diameter in the valley just ahead of the safety retaining flange at approximately 1.5". The larger newly available ball is 1.8" in diameter.
This colon tube is normally configured with a 1/4" bore, and our connector pack has the appropriate set of hose barb connectors to assist in connecting your new colon tube to most of your existing equipment.
The beginning length of this tube is 18" and is selectable up to and including 48" inches, including the new retention ball flanged base.
We can't guarantee everyone will be able to fully insert the longer selections of these larger diameter tubes as the human anatomy differs with every individual. Therefore, you purchase these items at your own risk. We want everyone to be safe and not do anything that would possibly cause any injury, so please use these appliances with care.
One additional point I would like to make. The very long tubes are very difficult to put the center core into. With that said, if you order a longer tube over 48", you might possibly notice the open core being a little off-center. It does not affect the function of the tube unless it gets really close to the side, however, we will not ship a tube in that condition. We will, however, ship a tube that has a core slightly off-center. Just wanted everyone to be aware of the anomaly if you purchase one of the very long tubes and the center core seems to be off a little. You will only be able to see it if you purchase the tube in clear translucent and should not be able to notice it by feeling the sides.