GRB86BT Unique 12" Ball Tip Silicone Enema Colon Nozzle

Here is a very unique style colon nozzle specifically designed with an incredibly stimulating ball tip.  This piece was devised so that it can be introduced to the lower sigmoid colon and held in place at variable areas of the nozzle, which can allow manageable depths of insertion depending on your preference.   

Its overall length is 12", allowing approximately 11.5" insertable to the flared base.   The tip diameter tapers up to 1.2" and is immediately followed by a 1.0” diameter valley or groove.  The second ball or rib is 1.25” in diameter and immediately followed by a 1.1” diameter valley or groove.  The advantage of this design is the 3^rd ball or rib that is approximately 1.75” in diameter and will hold the nozzle in place just after inserting beyond the ball.  The body or shaft preceding the ball is approximately 3.25” in length and 1.3” in diameter.  The final section of this model is a 1.6” diameter flared oval ball or rib that tapers back down to the 1.2” diameter final retaining valley proximal to the flared base flange.   Again, this model may be inserted and used at multiple depths and still retain a very good seal at any valley or groove to retain your enema solution.   It can also be configured without a bore and used for a stimulating solid-style sexual aid. 

The #18 and #30 softness selections is the only silicone that is available in pure translucent. The #00-50 and #10 base color is a Translucent White but can be mixed with all our standard color selections. 

Thank you for choosing Siliconenozzles.com!