Here it is, the Model PSP, for a Personally Special Piece. This nozzle was designed to stimulate and help retain the fluid being introduced into the colon in a more comfortable manner. If you order this nozzle in the #00-50 or #10 material, we can produce it in all the standard colors but not pure translucent. Pure Translucent is only available in the #18 and #30 material softness. #00-50 is very soft and comfortable for easy insertion, yet still firm enough to pass through the initial constrictor and slight bend between the rectum and the sigmoid colon. With its multiple sizes of ribs, ridges, or donuts, as some have called them, in the most optimum positions to help retain your high-volume infusions, this nozzle should be a welcomed addition to any collection. The Yellow nozzle in the photos was produced in the #18 material softness.
It starts off with a small 7/8" ball-style tip that graduates into a 1 1/8" elongated smooth ridge. It then gradually expands out to 1 1/2" for the third ridge, followed by a slightly diminished 1 1/4" valley before expanding back out to another 1 1/2" ridge. The next ridge enlarges up to approximately 2" before shrinking back down to a little over 1" diameter again for a length of 1 1/4". Next, it swells to a full 2 1/2" ball and then back down to 1 1/4" again before gradually tapering back up to another 1 3/4" ridge that fits just inside the anal sphincter. At the end of the nozzle is a gently tapered both in circumference and length, flange that seals the outside of the sphincter opening for a very comfortable fit. An idea of the softness of this nozzle is just slightly firmer than a marshmallow that instantly springs back to its original shape. This nozzle would work equally well as an anal plug for extended wear applications.
The overall length of this nozzle is 14 inches. The inside bore diameter is selectable.
Enjoy!
